Lightning Protection for Factories and Industrial Sites: A Practical Guide

Nov 13, 2026 | Lightning Protection

A factory roof is often the largest, flattest and most exposed surface for kilometres around. Add steel structures, chimneys, silos, conveyors and long cable runs, and an industrial site gives lightning plenty of paths to follow. A single strike can damage the structure, start a fire, put people at risk and stop production for days while equipment is repaired.

This guide explains how lightning protection for factories works, which system suits which kind of building, why earth bonding matters so much on industrial sites, and how testing and certification fit in with your insurance. It is written for factory owners, plant engineers, facilities managers and anyone responsible for an industrial property in South Africa.

Why factories need lightning protection

South Africa, and the Highveld in particular, has some of the highest lightning activity in the country, with storms through the summer months. Industrial sites carry extra risk because of what they are and what they contain:

  • Large roof areas that are likely to be struck.
  • Tall structures such as chimneys, silos, towers, tanks and gantries.
  • Flammable or explosive materials, including fuel, solvents, gas, dust and packaging.
  • People on site, often working outdoors or in large open buildings.
  • Sensitive electronics, from control panels and PLCs to servers, CCTV and access control.
  • Business interruption: downtime, lost orders and repair costs often cost more than the physical damage.

How a lightning protection system works

An external lightning protection system (LPS) does one job: it gives a lightning strike a safe, low-resistance path to ground, so the current does not pass through the building, its contents or its people. Every system has three parts.

Air termination

Rods, masts or a network of conductors on the roof that are positioned to be struck first. On factories this is usually a mesh across the roof, with rods on high points such as parapets, vents and roof plant.

Down conductors

Conductors that run from the roof to the ground, normally down the outside walls, spread around the building so the current is shared between several paths.

Earthing

The earth termination system that disperses the current safely into the ground. Its resistance is tested when the system is installed and should be checked regularly afterwards. For a closer look at rods and earthing, read our lightning protection rod guide.

Mesh systems vs lightning masts for industrial buildings

Not every building needs the same protection. On industrial sites, the two systems are often used together.

Mesh systems (Faraday cage method)

A mesh system is a network of conductors installed across the roof and connected to down conductors on the sides of the building. It forms a protective cage that guides lightning to the ground and covers the whole roof. Mesh systems are best for flat or large roof surfaces and for commercial and industrial structures, which makes them the usual choice for factories, warehouses and distribution centres.

Lightning masts (air termination rods)

A lightning mast is a vertical rod or pole placed at a key point next to the structure. Masts are best for tall or free-standing structures and high-risk areas, so on an industrial site they suit tanks, silos, fuel and gas stores, chimneys, pump stations and isolated outbuildings. Read mesh systems vs lightning masts for a side-by-side comparison.

Earth bonding: the part industrial sites cannot skip

Factories are full of metal: steel frames, roof sheeting, pipework, cable trays, racking, conveyors, tanks and machinery. During a strike, metal parts that are not connected can reach very different voltages, and the current can jump between them. That side-flash can injure people, damage equipment and ignite flammable material.

Earth bonding connects the conductive parts of a structure to a common ground, so they rise and fall together and no dangerous voltage differences form. On an industrial site, bonding usually covers the structural steel, metal services entering the building, roof plant, tanks and pipework, and the link between the lightning protection earth and the electrical earth. Earth bonding is one of Stop Surge’s core services.

Protecting electrical and electronic equipment

A lightning protection system protects the structure, but a strike on or near the site can still send surges into power, data and control cables. Certified lightning conductors combined with surge protection devices greatly reduce the risk and limit damage to electrical and electronic equipment. Surge protection devices form part of your electrical installation, so have your electrician install them and coordinate them with the lightning protection earthing. Stop Surge does not install surge protection devices.

Standards, risk assessment and insurance

In South Africa, lightning protection is designed and installed to national standards published by the SABS: SANS 10313 (Protection against lightning: physical damage to structures and life hazard), which specifically covers buildings with explosive or flammable substances, and the SANS 62305 series, South Africa’s adoption of IEC 62305. Both are built around a risk assessment, which looks at what the building is used for, who and what is inside, how it is built, which services connect to it and how often lightning strikes in the area.

Stop Surge works in strict compliance with SABS and SANS codes of standards, and every system we install is tested to ensure it meets the required resistance levels. Many insurers ask for proof that a lightning conductor is working. We test and certify the new installations we complete, as well as existing lightning conductors, for insurance approval.

Testing and maintenance on industrial sites

A lightning protection system is exposed to the weather all year. Conductors can be damaged during roof work or by rust, and the resistance of the earthing can diminish over time. Annual servicing is essential to maintain the required resistance levels and to pick up risks such as rust damage or loose connections. Plan an inspection after any roof alterations, new roof plant or extensions too, because new structures may sit outside the protected zone.

Lightning detection and weather stations

On large or outdoor operations, knowing a storm is coming can be as valuable as protecting the buildings. Stop Surge supplies weather stations and lightning detection systems that give real-time data and early warnings, so you can move people indoors and stop exposed work before the storm arrives.

Thatched buildings on industrial and agricultural sites

Some industrial, agricultural and hospitality sites also have thatched offices, lapas or staff housing, which are at higher risk because lightning can ignite thatch quickly. For thatched roofs the usual approach is a lightning mast beside the building, and a fire retardant such as Thatch Marshal 8000, which is water-based and designed specifically for thatch. Our thatch roof lightning protection guide explains that work in more detail, and you can see examples of our work on homes, businesses and industrial sites.

What affects the cost of a factory installation

Every industrial site is quoted on its own merits: roof size and height, the type of system, tall or free-standing structures, earthing conditions and whether an existing conductor needs testing. Quotations are free. Our lightning protection price guide explains the factors that go into a quote.

Get a free quote for your factory or industrial site

Stop Surge has been in lightning protection since 2009 and works on homes, businesses and industrial sites nationwide. We install, test and certify new systems, and we test and certify existing conductors for insurance. Quotations are free. Contact us, or call or WhatsApp 068 637 5918, and tell us the type of building and roof, whether you need a new installation or testing of an existing system, the site address, and whether your insurer needs a certificate.

Frequently asked questions about lightning protection for factories

Does a factory need a lightning protection system?

It depends on the risk assessment, which considers the building’s use, occupancy, construction, connected services and local lightning activity. Large roofs, tall structures, flammable materials and people on site all increase the need for protection.

Which lightning protection system is best for a factory?

Mesh systems (the Faraday cage method) are usually best for factories, because they suit flat or large roofs and commercial and industrial structures. Lightning masts are often added for tall or free-standing structures such as tanks and silos.

What is earth bonding and why does it matter?

Earth bonding connects the conductive parts of a structure to a common ground, so they stay at the same voltage during a strike. It prevents side-flashing between steelwork, pipes and equipment, which can injure people and start fires.

How often should a lightning protection system be tested?

Annual servicing is recommended, because the resistance of the earthing can diminish over time and conductors can be damaged by rust or roof work. Also have it inspected after any roof alterations or extensions. Stop Surge tests and certifies the new systems we install, as well as existing lightning conductors for insurance approval.

Can you certify an existing lightning conductor for insurance?

Yes. Stop Surge tests and certifies existing lightning conductors for insurance approval. Let us know if your insurer has asked for a lightning protection certificate when you request a quote.

Need a lightning conductor installed or tested?